How To Reset Oil Change On Jeep Grand Cherokee. Turn the ignition off and then start the engine to verify the indicator has been reset. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure.
No products in the cart. Below is the procedure for the jeep cherokee 2015. Please click oil reset to see the process for other car.
Turn The Ignition Off And Then Start The Engine To Verify The Indicator Has Been Reset.
Push the gas pedal to the floor three times (within ten seconds). Put the transmission in park position and key in on position. We hope you find these reset procedures helpful.
Fully Depress The Accelerator Pedal Slowly Three Times Within 10 Seconds 3.
Below is the procedure for the jeep cherokee 2015. Use the down arrow on your steering wheel to scroll through the menu of your vehicle information center until you reach vehicle info. Follow the steps below to reset the oil life monitor after.
Hold Down The Ok Button.
Repeat this procedure, if the. Pressing the step button again while in this display will select “yes” or “no”. Mlb 22 theme team spreadsheet 0;
After These Steps Have Been Performed, You Have Successfully Reset The Oil Life On The Jeep Cherokee If You Are Unable.
Jeep / chrysler / fiat do not have a recommended oil change interval, they use the compu. The display should read 100% when it is reset. Press the start/stop button to turn the electronics off.
Fully Depress The Accelerator Pedal Slowly Three Times Within 10 Seconds And The Oil Change Is Reset.
Push and hold the ok button until the oil light percentage changes to 100%. If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. Use the down arrow on your steering wheel to scroll through the menu of your vehicle information center until you reach vehicle info.